Skip Navigation LinksPRODUCTS / PARTS / CONTROLLERS / Accessories-Single

Accessories-Single

 CONTROLLER ACCESSORIES FOR SINGLE, STAND-ALONE GENERATOR SETS
 MODEL  OVERVIEW
 GSC1 RS232-485  Dual port extension module to allow for connecting to both RS232 and RS485.  This can be used for connecting to the internet bridge via the RS232 and for connecting to Modbus via the RS485
 GSRA1  15 Channel remote annunciator for use with either Clarke controller via CAN bus communication
 GSC1-USB  USB port module to replace the standard RS232 output connection with just one USB male Type B connection
 GSC1 IB-LITE  Ethernet module to replace the standard RS232 connection with just one Ethernet RJ45 connection.  This supports TCP, SMTP, HTTP, and Modbus/TCP protocols.  It gives access to web interface for basic monitoring and adjustment of the controller
 GSC1 AOUT8  Plug-in, interface module to provide 8 PWM analog outputs for driving VDO style gauges for engine values
 GSC-PTM  Digital and analog extension module with 8 binary inputs and outputs, 4 analog inputs (ohms, milliamps, millivolts), and 1 analog output (4-20 mA).  This unit can be networked on the CAN bus to give access to 4 units with one controller
 GSC-LBA  Low battery adapter that connects to the controller power supply to prevent the controller from shutting off from a voltage dip during cranking
 GSC1-BIO8  Plug-in module to provide 8 mixed binary inputs and outputs
 GSC-IB  Internet bridge (single set) which connects to controller via RS232 or over CAN bus and then connects to the internet through an Ethernet cable
 GSC-IOM  Digital and analog I/O add-on module (single set) with 8 binary inputs and outputs, 4 analog inputs (ohms, milliamps, millivolts), and 1 analog output (4-20 mA).  This unit is a single set unit only and cannot be put on the network
 GSC-MTU  Measuring transformer (1:1) used for galvanically separating measured voltage and controller, or when neutral is separated
 GSC-MTU-2:1  Measuring transformer (2:1) used for galvanically separating measured votage and controller, or when neutral is separated.  Used in 600V applications
 GSC-MTU-C
 
 Measuring transformer (1:1) used for galvanically separating measured voltage and controller, or when neutral is separated.  Capacitors are added in case of extreme distortions from harmonics