Skip Navigation LinksPRODUCTS / PARTS / CONTROLLERS / Accessories-Multiple

Accessories-Multiple

CONTROLLER ACCESSORIES FOR MULTIPLE GENERATOR SETS
 MODEL  OVERVIEW
 GSCP1  A high functionality controller for advanced control over single unit setup, or ideal for parallel applications for up to 32 gensets in parallel
 GSRA1  15 Channel remote annunciator for use with either Clarke controller via CAN bus communication
 GSP1 InteliVision  A remote, full color display for GSCP1 controller which is connected via RS485
 GSCP LSM+PMS  Load sharing and power management dongle is required ffor gensets in parallel for sharing loads and managing them.  One unit per genset controller
 GSCP-AVRi  Automatic voltage regulator interface module is required for interfacing with the voltage regulator when paralleling gensets together
 GSCP-AVRi-TRASNLV  External voltage transformer to power the GSCP-AVRi unit
 GSCP-DISPLAY GC  Remote display for GSCP1 controller which is connected via RS485
 GSCP-I-AOUT8  Analog extension module which provides 8 analog outputs per module which can be configured as 0-20 mA DC, 0-10 V DC, and PWM.  Up to 4 can be configured per controller
 GSCP-IB  Internet bridge (single set) which connects to controller via RS232 or over CAN bus and then connects to the internet through an Ethernet cable
 GSCP-IB3  GSCP-IB dongle allowing up to 3 controllers to be networked over CAN bus onto the internet
 GSCP-IB7  GSCP-IB dongle allowing up to 7 controllers to be networked over CAN bus onto the internet
 GSCP-IB15  GSCP-IB dongle allowing up to 15 controllers to be networked over CAN bus onto the internet
 GSCP-IB32   GSCP-IB dongle allowing up to 32 controllers to be networked over CAN bus onto the internet
 GSC-MTU Measuring transformer (1:1) used for galvanically separating measured voltage and controller, or when neutral is separated. 
 GSC-MTU-2-2 Measuring transformer (1:1) used for galvanically separating measured voltage and controller, or when neutral is separated. Used in 600V applications.
 GSC-MTU-C Measuring transformer (1:1) used for galvanically separating measured voltage and controller, or when neutral is separated.  Capacitors are added in case of extreme distortions from harmonics
 GSC-PTM Digital and analog control module with 8 binary inputs and outputs, 4 analog inputs (ohms, milliamps, millivolts), and 1 analog output (4-20 mA).  This unit can be networked on the CAN bus to give access to 4 units with one controller 
 GSCP-LB+ Local/remote connection bridge allowing the user to conncet to multiple gensets over the CAN bus.  This module can communicate via RS232/485 and USB 
 GSC-LBA Low battery adapter which connects to the controller power supply to prevent the controller from shutting off from a voltage dip during cranking 
 GSCP-AIN8 Analog extension module providing 8 additional analog inputs which can utilize two wire resistors, 3 wire resistor, current, thermocouple, and voltage.  These can be expanded with up to 8 units over CAN bus 
 GSCP-BIN16/8 Digital I/O module providing 16 binary inputs and 8 binary outputs which are all galvanically separated.  Two pulse inpus are also provided.  Up to 6 modules can be connected to a controller.